| 型號 | 品牌 | 功能應用 |
|---|
| MAX6315US25D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.50V. Reset timeout period(min) 1120ms. |
| MAX4251EUA | MaximIC | Single, single-supply operation +2.4V to 5.5V, low-noise, low-distortion, Rail-to-Rail op amp. Gain bandwidth 3MHz, min stable gain 1V/V, with shutdown. |
| MAX6343MUT-T | MaximIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 4.38V. Open-drain active-low reset output, manual-reset input. |
| MXD1013PD200 | MaximIC | 3-in-1 silicon delay line. Output delay 200ns. |
| MAX6319MHUK42C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms |
| MAX5253BCAP | MaximIC | +3V, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| ICL7137CJL | MaximIC | Low power, 3-1/2 digit A/D converter |
| MAX3485EEPA | MaximIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 12Mbps. Supply voltage 3.0V to 3.6V |
| MAX6318MHUK40CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6361LUT31-T | MaximIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 3.06V. Active-low push-pull reset. |
| MAX6318MHUK28DW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX1172CBH | MaximIC | 12-bit, 30 Msps, TTL-output ADC |
| MAX641BEJA | MaximIC | +5V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy |
| MX574AJEWI | MaximIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 75. |
| MAX888ECJ | MaximIC | Wireless and satellite handset power-management IC. Lower preset voltage range. |
| MAX338MJE | MaximIC | 8-channel, low-leakage, CMOS analog multiplexer. |
| MAX4074BBESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 12.5V/V, noniverting gain 13.5V/V, -3dB BW 64kHZ. |
| MAX6310UK40D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.900(min),4.100(max). Nominal timeout period 140ms. |
| MAX953C/D | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 1V/V. Supply current 5microA. |
| MAX6318MHUK45DW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6321HPUK47DX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX358EWE | MaximIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
| MAX6504UKN005-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -5. |
| MAX6337US20D1-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.0V, reset timeout(min) 1ms. |
| MAX4514CUK | MaximIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally open (NO), +2V to +12V single-supply operation. |
| MAX639EPA | MaximIC | 5V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| DG300CWE | MaximIC | Dual, TTL compatible CMOS analog switche |
| MAX457CSA | MaximIC | Dual CMOS video amplifier. |
| MAX6320PUK29DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4593EPE | MaximIC | High-speed, single-supply 12V, quad, SPST analog switches (two NO and two NC switches). |
