| 型號 | 品牌 | 功能應用 |
|---|
| MAX368EJN | MaximIC | Fault-protected analog multiplexer with latch. 8 channel single-ended (1 of 8). |
| MAX185BENG | MaximIC | High-speed 12-bit A/D converter with external reference input. 10 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX6316LUK40BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6316LUK48AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6318LHUK46DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1.12sec,typ watchdog timeout 25.6sec |
| MAX608ESA | MaximIC | 5V or adjustable, low-voltage, step-up DC-DC controller. |
| MAX6346UR34-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.400V. Order increment 10k |
| MAX6321HPUK32BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| ICM7242IPA | MaximIC | Fixed timer/counter |
| MAX6321HPUK50BX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX3218CPP | MaximIC | 1.8V to 4.25V-powered, 1microA supply current RS-232 transceiver with AutoShutdown. |
| MAX6321HPUK40DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6328UR25-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.500V. Order increment 10k |
| MAX737CPD | MaximIC | -15V, inverting carrent-mode PWM regulator. |
| MAX535BC/D | MaximIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-1. +5V single-supply operation. |
| MAX3483ECPA | MaximIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0.25Mbps. Supply voltage 3.0V to 3.6V |
| MAX792MEJE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V |
| MAX6322HPUK38C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms |
| MAX4553C/D | MaximIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (two NO and two NC switches). |
| DG413C/D | MaximIC | Improved, quad, SPST analog switches |
| MX574AJN | MaximIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 50. |
| MAX6316LUK31BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX627MJA | MaximIC | Dual non-inverting power MOSFET driver. |
| MAX275BEPP | MaximIC | 4th-order continuous-time active filter |
| MAX6378XR42-T | MaximIC | Ultra-low-power voltage detector, 4.2V |
| MAX150BEPP | MaximIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1 LSB |
| MXD1000PD200 | MaximIC | 5-tap silicon delay line |
| MAX6310UK35D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.413(min),3.588(max). Nominal timeout period 20ms. |
| MX565AJCDWG | MaximIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/2LSB |
| MAX407CPA | MaximIC | 1.2microA max, dual, single-supply op amp. |
