| 型號 | 品牌 | 功能應用 |
|---|
| MAX4373HESA | MaximIC | Low-cost, micropower, high-side current-sense amplifier + comparator + reference IC. Gain +100V/V. |
| MAX6807XR26-T | MaximIC | Voltage detector. Reset output active-high, push-pull. Threshold reset 2.6V |
| MAX6317HUK31DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX6503CMN035-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) -35. |
| MXD1000UA35 | MaximIC | 5-tap silicon delay line |
| MAX4588EWI | MaximIC | Low-voltage, high-isolation, dual 4-channel RF and video multiplexer. |
| MAX4585EUB | MaximIC | Serially controlled SPST and SPDT audio/video switches |
| MAX6322HPUK30B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 20ms |
| MAX6375UR22-T | MaximIC | Ultra-low-power voltage detector, 2.2V |
| MAX4536CEE | MaximIC | Quad, low-voltage, SPST analog switches with enable. 4 NO. |
| MAX6318MHUK37CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6309UK25D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.438(min),2.563(max) Nominal timeout period 1120ms. |
| MAX4169EPD | MaximIC | Quad, high-output-drive, precision, low-power, single-supply +2.7V to +6.5V, Rail-to-Rail I/O op amp. |
| MAX6320PUK27DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| REF02EZ | MaximIC | +5V precisioon voltage reference. Max TEMPCO 8.5ppm/degC. Initial error +-15mV |
| MAX507AENG | MaximIC | Voltage-output, 12-bit DAC with internal reference. 12 data-bus widths. Error +-1/2. |
| MAX5151BEEE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-2. |
| MAX6321HPUK39DY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6314US35D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.50V. Reset timeout period(min) 1ms. |
| MAX4570EAI | MaximIC | Serrially controlled, dual 4x2, clickless audio/video crosspoint switches. |
| MAX6315US29D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.93V. Reset timeout period(min) 1120ms. |
| MAX738AC/D | MaximIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. |
| MAX418CPD | MaximIC | 1.2microA max, quad, single-supply op amp. |
| MAX6307UK26D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.564(min),2.696(max).Nominal timeout period 140ms. |
| MAX4615EPD | MaximIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NC switches. |
| MAX6310UK46D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.514(min),4.746(max). Nominal timeout period 1ms. |
| MAX6321HPUK49BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX802RMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MXD1005SA250 | MaximIC | 5-tap silicon delay line |
| MAX6314US30D2-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.00V. Reset timeout period(min) 20ms. |
