| 型號 | 品牌 | 功能應用 |
|---|
| MAX322CUA | MaximIC | Precision, dual-supply, SPTS analog switch. |
| MAX933EPA | MaximIC | Dual low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference and internal programmable hysteresis.. |
| MXD1013SE050 | MaximIC | 3-in-1 silicon delay line. Output delay 50ns. |
| MAX138CQH | MaximIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX322CSA | MaximIC | Precision, dual-supply, SPTS analog switch. |
| MAX437EPA | MaximIC | Low noise, high-precision op amp. 60MHz gain-bandwidth product. |
| MAX6320PUK38CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6318LHUK27DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX878EPA | MaximIC | Step-up/step-down DC-DC converters |
| MAX6306UK31D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.003(min),3.157(max) Nominal timeout period 20ms. |
| MAX3096CPE | MaximIC | +-15kV ESD-Protected, 10Mbps, 5V quad RS-422/RS-485 receiver. |
| MAX6316MUK30DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| ICL7663ITV | MaximIC | Programmable positive voltage regulator |
| MAX6318MHUK29DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4275ACEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 0.5, 1+ (Rf/Dg) noninverting gain 1.5, -3dB BW 1280kHz. |
| MAX310C/D | MaximIC | CMOS RF/video multiplexer (1-of-8). |
| MAX6316MUK35BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6316LUK43CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX525BMJP | MaximIC | Low-power, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX253EPA | MaximIC | Transformer driver for isolated RS-485 interface. |
| MAX3223EAP | MaximIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX6318MHUK33CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| DG304CK | MaximIC | CMOS dual and quad analog switch. |
| MAX848ESE | MaximIC | 1-cell to 3-cell, high-power, low-noise, step-up DC-DC converter. 0.8A |
| MAX5151BEEE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-2. |
| MX7530LD | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.05% |
| MAX6307UK27D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.633(min),2.768(max).Nominal timeout period 140ms. |
| MAX6316MUK34DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX157ACUA | MaximIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 0.5 |
| MAX322MJA | MaximIC | Precision, dual-supply, SPTS analog switch. |
