| 型號 | 品牌 | 功能應用 |
|---|
| MAX1240AMJA | MaximIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1/2 |
| MAX6317HUK44DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX6318MHUK40BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6342LUT-T | MaximIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 4.63V. Push-pull active-low reset output, manual-reset input. |
| MAX6313UK38D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.705(min) 3.895(max).Nominal timeout period 1ms. |
| MAX6316LUK36DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX6310UK32D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.120(min),3.280(max). Nominal timeout period 140ms. |
| MAX6313UK48D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.680(min) 4.920(max).Nominal timeout period 20ms. |
| MAX352C/D | MaximIC | Precision, quad, SPST analog switch |
| MAX643BCSA | MaximIC | +15V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy |
| OP37FP | MaximIC | Low-noise precision operational amplifier. 63MHz gain-bandwidth product. 17V/micros slew rate. |
| DG211CJ | MaximIC | Quad SPST CMOS analog switch. |
| MAX6316MUK31BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6322HPUK43A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms |
| MAX9043BEUB | MaximIC | Micropower, single-supply operation +2.5V to 5.5V, dual comparator + precision reference IC. |
| MAX6310UK38D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.705(min),3.895(max). Nominal timeout period 1ms. |
| MAX3233ECWP | MaximIC | +-15kV ESD-protected, 1microA, 250kbps, 3.3V, dual RS-232 with internal capacitor. |
| MAX6318LHUK42BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 20ms,typ watchdog timeout 102ms |
| LH0101ACK | MaximIC | Power operational amplifier |
| MAX385EPE | MaximIC | Precision, low-voltage analog switch. |
| MXD1005C/D75 | MaximIC | 5-tap silicon delay line |
| MAX6351LSUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset output 5V and 3V. Standard version. |
| MAX6354LRUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 3V. |
| MAX138C/D | MaximIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX973C/D | MaximIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes. |
| DG384BK | MaximIC | General purpose CMOS dual analog switch. |
| MAX4043ESD | MaximIC | Single/dual/quad, low-cost, micropower rail-to-rail I/O op amp. |
| MAX6250BCSA | MaximIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX954MJA | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 10V/V. Supply current 5microA. |
| MAX6379UR39-T | MaximIC | Ultra-low-power voltage detector, 3.9V |
