| 型號 | 品牌 | 功能應用 |
|---|
| MAX4275BKEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 50, 1+ (Rf/Dg) noninverting gain 51, -3dB BW 330kHz. |
| MAX4222ESD | MaximIC | Quad, 230MHz -3dB bandwidth, single 3.3V/5.0V operation, gain of +2V/V or -1V/V, closed-loop, Rail-to-Rail buffer. |
| MAX4606ESE | MaximIC | Low on-resistance (5om max), quad, SPST, CMOS analog switches (two NO and two NC switches). |
| MAX953ESA | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 1V/V. Supply current 5microA. |
| MAX1204BMJP | MaximIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1 |
| MAX901BC/D | MaximIC | High-speed, low-power voltage comparator |
| MAX6320PUK36BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX4523EEE | MaximIC | Quad, low-voltage, SPST analog switch. |
| MX7538SD | MaximIC | Microprocessor compatible CMOS, 14-bit D/A converter. Error +-2 LSB. |
| MAX234EJE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX791EPE | MaximIC | Microprocessor supervisory circuit |
| MAX6318MHUK38AW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX632ACSA | MaximIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MAX1111CPE | MaximIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 4-channel single-ended or 2-channel differential inputs |
| MXD1013PD080 | MaximIC | 3-in-1 silicon delay line. Output delay 80ns. |
| MX7533JN | MaximIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.2% |
| MAX6318LHUK40BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.000V min, reset timeout 20ms,typ watchdog timeout 102ms |
| MAX230EWP | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX562C/D | MaximIC | Complete 230kbps, 2.7V to 5.25V serial interface for notebook computers. |
| MAX520ACAP | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 1. |
| MAX1271AEAI | MaximIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MX7541ATD | MaximIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX335CWG | MaximIC | Serial controlled, 8-channel SPST switch. |
| MAX4525C/D | MaximIC | Low-voltage, single-supply multiplexer and switch. |
| MAX1680C/D | MaximIC | 125 mA, frequency-selectable, switched-capacitor voltage converter. |
| MAX912CPE | MaximIC | Single, ultra-fast(10ns), low-power, precision TTL comparator. |
| MAX6313UK26D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.564(min) 2.696(max).Nominal timeout period 20ms. |
| MAX6312UK48D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.680(min) 4.920(max). Nominal timeout period 1ms. |
| MAX1090AEEI | MaximIC | 400ksps, +5V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5 |
| MXD1013UA012 | MaximIC | 3-in-1 silicon delay line. Output delay 12ns. |
